The universal dividing head,type F11100AL,F11125AL,F11160AL,is the same as type FW80 of the structure,and the operation handle is set on the left.
Accessories:tailstock, change gear bracket,change gears Qty.12,jack,center,carrier,hole plate,flange,3-jaw chuck ,face plate(optional)
Items | FW80 | F11100A | F11125A | F11160A | F11200A |
Center height mm | 80 | 100 | 125 | 160 | 200 |
Swivel angle of spindle from its horizontal position(upward) | ≤90° | ≤95° |
Horizontal position(downward) | ≤6° | ≤5° |
Rotating angle of spindle for one complete revolution of dividing handle | 9°(540grad.,1’each) |
Min. reading of vernier | 10” |
Worm gear ratio | 1:40 |
Taper of spindle bore | MT3 | MT4 |
Width of locating key mm | 14 | 14 | 18 | 18 | 22 |
Dia.of short taper of spindle nose for mounting flange mm | Φ36.541 | Φ41.275 | Φ53.975 |
Hole numbers on index plate | 1st plate | 24,25,28,30,34,37,38,39,41,42,43 |
2nd plate | 46,47,49,51,53,54,57,58,59,62,66 |
Change gear | Module | 1.5 | 2 |
Teeth numbers | 25,30,35,40,50,55,60,70,8,090,100 |
Individual indexing error of the spindle for one complete revolution of dividing handle | 60” | ±45” |
Cumulate error at any 1/4 periphery of spindle | ±1’ |
Max. bearing Kg | 80 | 100 | 130 | 130 | 130 |
N.W. Kg | 36 | 67 | 110 | 130 | 135 |
G.W. Kg | 45 | 79 | 126 | 149 | 155 |
Case dimensions mm | 542X403X220 | 616X465X265 | 635X530x310 | 710x535X342 | 758X593X383 |